Release the three clips around the base.
Remove the cage base and the feeder unit.
The top of the feeder can only be opened when the wire hanger is rotated completely over to the back (lid hinge) side of the feeder.
Remove the perches from inside the feeder tube and push them into the holes at the bottom of the feeder ports.
Fill the feeder with seeds. Snap the lid fully shut and rotate the wire hanger into the upright position or fully forward to lock the lid.
Keep the feeder hanger upright, align it with slot on the top of the outer cage.
Push the cage base and the feeder unit together and close the 3 clips around the base.
Site your feeder away from any bushes etc. where predators might hide.